Rover 214 1989-1996, Rover 414 1990-1995 - manuale di riparazione, la manutenzione, il funzionamento del veicolo.
Guida per la riparazione e la manutenzione (Haynes) auto Rover 214 hatchback (ottobre 1989 al marzo 1996 anno di rilascio) con motore 1.4 l (1397cc) 8 valvole e 16 valvole serie K, e auto Rover 414 berlina (dal marzo 1990 al 1995 anno di laurea).

The Rover 214 Hatchback and 414 Saloon models covered in this Manual are a muchdeveloped
version of the original 213 and 216 models first launched in 1984. The 214 five-door model was the first to be introduced in October 1989 and was followed closely by the 414 model introduced in March 1990. The 214 model range is further aggiornato in September 1990 when a three-door variant was introduced.
All models are fitted with the new 1.4 litre " K " series engine. The 214 S model (first introduced in September 1990) has an eightvalve single overhead camme version of the engine which is fed by an SU KIF carburettor. All other 214 and 414 models are equipped with a sixteen-valve double overhead
camme version of the engine which is controlled by a Rover/Motorola Piattaforme di Database Management System (MEMS) with either single-point fuel injection (SPi) o multipoint fuel injection (MPi). All versions of the engine are able to accept a full range of emission control systems, up to and including a three-way regulated catalytic converter. The five-speed transmission, which is a joint development by Rover and Peugeot engineers, is of Peugeot design and produced by Rover. The transmission is fitted to the lefthand end of the engine. The complete engine/transmission unit is mounted transversely across the front of the car and drives the front wheels through unequallength driveshafts.
The front suspension incorporates MacPherson struts and the rear is of the double wishbone type.
Braking is by disc at the front and drums at the rear, with a dual-circuit hydraulic system. On all models in the range, an Antilock Braking System (ABS) was offered as an optional extra. If ABS is fitted, then is by braking discs both at the front and rear.